Implementation strategies and billing information, go to theĠ: Initial draft completed and sent to Extended Review.Ġ: Corrected Product Name to swoRDFish inconsistency.Īttachments This solution has no attachmentĬopyright © 2011 Sun Microsystems, Inc. Information about FAB documents, its release processes,

Manually set 'external serial port' in the BIOS to direct output to the ResolutionEnter the BIOS set-up menu and hit 'F9' (set defaults) and reboot, or Reset by the Manufacturing (MFG) test process on these systems. Process because Manufacturing manually downloaded approximately 40 toĥ0 early production units off line, thus BIOS did not get checked and Units not getting complete normal software download and BIOS preset Serial number / date codes of affected system will be 747xxxxxxx through 751xxxxxxx approximately. I found this link Download Sun StorageTek SAS RAID Internal HBA Firmware and the downloadable firmware update in file SGXPCIESAS-R-INT-ZFW17757.zip with which I could successfully upgrade my controller card (without MODE0) to build 17757 and it is now capable of handling. The affected units were built in week 48 - the last week of November and first week of December of 2007. Although quite an old post, I have just had the very same situation, same controller type in a full Sun Fire X4150 server. Setting is now being used in Manufacturing. The issue has been corrected and the proper BIOS Issue will manifest itself on initial power on of the system.Ĭonfigured to 'system' from the default setting of 'SP' on some early SymptomsNo console output when connected to the Service Processor (SP). Last week of November and first week of December of 2007 are Contributing FactorsSun Fire X4150 systems built during week 48 of calendar year 2007. ImpactNo console output, but system will boot and operate correctly. No console output, but system will boot and operate correctly (see details below).

GCS>Sun Microsystems>Sun FAB>Standard>Reactive.

Sun fire x4150 firmware